
Lithium-ion forklifts in Singapore: a reliable alternative to diesel and lead-acid
If you run a warehouse, a logistics floor or a smaller business in Singapore, the usual choice is diesel or lead-acid. Lithium-ion is now the third and the better option! It plugs in at breaks, needs no battery watering, and, in our experience since 2019, stands up to the work.
THE SHORT ANSWER
A lithium-ion forklift is a reliable alternative to diesel and lead-acid for many Singapore sites. Diesel exhaust makes diesel unsuitable indoors. The battery charges in the forklift, can be topped up at breaks, and needs no watering. Expect about 4 hours per charge on heavy use and about 6 hours on medium use. Scantruck has worked with lithium-ion since 2019.
Tell us your hours, loads and layout, and we will compare the options for your site.
~4 hours
per charge on heavy use
~6 hours
per charge on medium use
Since 2019
hands-on with lithium-ion
Opportunity charging: top up at breaks, keep the forklift working
Take a break, plug in, carry on. A lithium-ion forklift accepts a top-up whenever it is parked, so there is no battery to swap and, typically, no spare battery to buy for each forklift.
How it works at breaks and shift changes
Plug the forklift in during breaks, meals and shift changes, and keep the same battery in the forklift. There is no wait for a full discharge, and no swap labour on the floor.
Chargers work best where forklifts already park. Agree which breaks are charging windows, and get operators into the habit. We can talk through that layout with you.
Why lithium-ion can be topped up, and lead-acid generally cannot
Lithium-ion accepts frequent partial charges without the damage lead-acid suffers. Lead-acid is normally charged fully; partial charging can cause sulphation, which lowers capacity over time, so opportunity charging is generally not recommended.
Who it suits
Opportunity charging suits sites that run more than one shift, or that keep forklifts busy through the day. On a single, predictable shift there is time to charge afterwards, so the gain is smaller, and we will tell you so.
Are lithium-ion forklifts strong enough?
Scantruck has had hands-on experience with lithium-ion since 2019. In the applications we have supported, we find it performs on a par with diesel and offers good value. We do not claim it fits every job. We assess your loads, hours and operating conditions first, whether the work is in a warehouse, outdoors or mixed, and tell you if it is the right tool.
Diesel has another limit on many Singapore sites: exhaust fumes make it unsuitable for indoor use. A lithium-ion forklift has no exhaust fumes, so it can work in a warehouse without that problem.
Lithium-ion vs diesel vs lead-acid at a glance
You pay not only when you buy the forklift. Fuel, battery chores and servicing make up a large part of its working life. The table below compares the three options in plain terms.
Figures are typical planning ranges from manufacturers and industry sources; your site and duty cycle will differ.
Factor
Lithium-ion
Diesel
Lead-acid
Charging or refuelling
About 1–2 hours. Opportunity charging is fine.
No charging. Refuel from a tank can be done in less than 5 mins
About 8 hours or more, plus cooling.
Charging at breaks
Yes
Not applicable
Not recommended. It can shorten battery life.
Energy
Runs on electricity
Burns diesel
Runs on electricity
Battery or engine care
No watering or equalising
Engine oil, filters and exhaust-system servicing
Regular watering, cleaning and equalising
Forklift servicing
Still needed (hydraulics, brakes, mast, tyres, chains)
Still needed, plus engine servicing
Still needed (hydraulics, brakes, mast, tyres, chains)
Space and site needs
No separate battery room or battery swaps, typically. The site still needs a suitable electrical supply.
No charging area, but needs fuel storage and handling.
Ventilated charging area. Spare batteries on multi-shift sites.
Indoor use
No exhaust fumes from the forklift. Suited to indoor work.
Exhaust fumes make diesel unsuitable indoors.
No exhaust fumes from the forklift. Suited to indoor work.
Safety points
Sealed pack with a battery management system (BMS). Some manufacturers use lithium iron phosphate (LFP) chemistry. Ask us about your site.
Exhaust fumes and fuel handling.
Acid and hydrogen handling. Ventilation needed.
Running cost
Lower
Higher fuel cost and engine servicing.
Higher routine labour, spare batteries and handling.
Best fit
Multi-shift, high-utilisation, tight floor space, or indoor work
Outdoor work, or a site with no electrical supply for chargers
A single, predictable shift with overnight charging, or existing chargers
Our EP lithium-ion forklift range
Our lithium-ion forklift range comes from EP. We lead with the EP EFL303S, a 3.0-tonne lithium-ion counterbalance forklift, and also offer the EP EFL504-B for heavier loads at 5.0 tonnes. Tell us your loads, shifts and charging layout, and we will match the model to your site.
Scantruck has 2.5-tonne and 3-tonne EP lithium-ion forklifts in stock, new and used.

EP EFL303S: 3.0-tonne lithium-ion counterbalance forklift
Capacity: 3,000 kg at a 500 mm load centre
Battery: 80 V lithium-ion, 80 V / 230 Ah as standard, with an 80 V / 460 Ah option
Charging: external chargers from 35 A to 200 A at 80 V, with opportunity charging at breaks
Lift height: 3,000 mm as standard, up to 6,000 mm on a 3-stage full-free mast
Travel speed 16/17 km/h (laden/unladen), gradeability 20/25% (laden/unladen), turning radius 2,347 mm
Built for site work: solid rubber tyres, high ground clearance and a rain-proofed charging port
Options: cabins, a joystick, an operator presence system and telematics. Seat noise is under 74 dB(A)

EP EFL504-B: 5.0-tonne high-capacity lithium-ion counterbalance forklift
Capacity: 5,000 kg at a 500 mm load centre
Battery: 96 V lithium-ion, offered in 410 Ah, 460 Ah or 560 Ah to suit the customer’s shifts.
Charging: 100 A, 150 A or 200 A chargers at 96 V, with opportunity charging at breaks
Lift height: 3,000 mm as standard, up to 7,000 mm
Travel speed 16/16.5 km/h, gradeability 16/22%, turning radius 2,930 mm
Drive and controls: PMSM drive, a wide-view mast with a lowering buffer, and a 7-inch LCD
Tyres and options: pneumatic tyres as standard, with solid or non-marking options. Optional cabin and battery heating
Source: EP datasheets, https://ep-equipment.com/product/efl303s/ and https://ep-equipment.com/product/efl504-b/
For the wider forklifts and material handling equipment range, including diesel and electric options, start at the equipment overview.
Buy, rent or lease
Buy
Scantruck has 2.5-tonne and 3-tonne EP lithium-ion forklifts in stock, new and used.
Rent new on a minimum 36-month term
New units have a minimum rental term of 36 months.
Rent used short term
Used (second-hand) units can be rented short term. For short- or long-term forklift rental, see the rental page.
How long a lithium-ion forklift runs on one charge
Run time depends on how hard the forklift works. On heavy use, expect about 4 hours per charge. On medium use, about 6 hours.
Top up at breaks and the same forklift keeps going. Actual times vary with load, duty and site conditions.
Lower maintenance cost, not less care for the forklift
A lithium-ion forklift typically has a lower maintenance cost than diesel, because there is no engine oil, fuel filters or exhaust system to service. Compared with lead-acid, there is no watering or equalising.
The forklift itself still needs regular servicing: hydraulics, brakes, mast, tyres and chains. A lithium-ion battery does not make the forklift maintenance-free.
Scantruck’s Workshop & Forklift Department provides forklift servicing and repairs.
Who a lithium-ion forklift suits, including smaller businesses
Lithium-ion tends to suit busy, multi-shift or high-utilisation sites, where charging must fit around breaks and floor space is tight. It also suits indoor work, where diesel exhaust is a poor fit.
If you run a smaller operation, lithium-ion can still be worth comparing. It can make sense when indoor air quality matters, floor space is tight, or you want to avoid battery-watering routines, even if you are not running multiple shifts. A site comparison will help you weigh the purchase price against running costs for your hours and layout.
When a lead-acid forklift still makes sense
Lead-acid can still suit a single, predictable shift with overnight charging, or a site that already has suitable chargers.
When diesel still makes sense
Diesel can still suit outdoor work, or a site with no electrical supply for chargers. For indoor work, diesel exhaust makes it a poor fit.
Lithium-ion forklift safety and your site
Lithium-ion forklift batteries are sealed packs controlled by a battery management system (BMS). Some manufacturers use lithium iron phosphate (LFP) chemistry.
Lead-acid batteries give off hydrogen during charging and need a ventilated charging area. Diesel brings exhaust fumes and fuel handling.
Safe use depends on where and how you charge. Ask us about your site and charging layout.

Why Scantruck
SINCE 1983
Scantruck Engineering has been based in Singapore since 1983. We have had hands-on experience with lithium-ion since 2019, and in the applications we assess, we find it performs on a par with diesel and offers good value.
WORKSHOP & PARTS
The Workshop & Forklift Department is at 16 Gul Drive. We service and repair forklifts, and we supply lithium-ion forklifts from EP, led by the EP EFL303S. Parts support sits at 9 Buroh Street.
A FAIR COMPARISON
We compare lithium-ion with diesel and lead-acid against your shifts, loads and charging layout, rather than push a single answer.
Our 3-step plan: from your shifts to the right forklifts
01
Tell us your operating hours, loads and conditions, including whether the work is indoor, outdoor or mixed, and how you charge or refuel today.
02
We assess your site, including electrical supply, and compare lithium-ion, diesel and lead-acid options side by side.
03
You choose the forklifts, and Scantruck supports them with the services already on our site: maintenance and repairs, parts, used forklifts, and rental where it fits.
Lithium-ion forklift FAQs
How long does a lithium-ion forklift take to charge?
Typically about 1 to 2 hours, compared with about 8 hours or more for a lead-acid battery, which also needs time to cool, according to Toyota Material Handling Europe. Actual charging time depends on the battery, the charger and your site's power supply.
Can I charge a lithium-ion forklift during breaks?
Yes. Lithium-ion forklift batteries can be opportunity charged during breaks and shift changes. The battery stays in the forklift, so there is no battery swap, and a multi-shift site typically needs fewer spare batteries. Lead-acid batteries are generally not charged this way, because frequent partial charging can shorten their life.
How long does a lithium-ion forklift run on one charge?
Run time depends on how hard the forklift works. On heavy use, expect about 4 hours per charge. On medium use, about 6 hours. Top up at breaks and the same forklift keeps going. Actual run time varies with load, duty and site conditions.
Are lithium-ion forklifts strong enough to replace diesel?
In suitable applications, yes. Scantruck has had hands-on experience with lithium-ion since 2019 and finds it performs on a par with diesel, with good value. Diesel exhaust also makes diesel unsuitable for indoor use. Whether it fits depends on your loads, shifts and operating environment, so we assess your application first.
Does a lithium-ion forklift need maintenance?
The battery does not need watering or equalising. The forklift itself still needs regular servicing, including the hydraulics, brakes, mast, tyres and chains. Scantruck's Workshop & Forklift Department provides forklift maintenance and repairs.
Do I need a battery room for a lithium-ion forklift?
Lithium-ion forklifts typically do not need a separate battery room or battery swaps, because the battery is charged in the forklift. Your site still needs a suitable electrical supply for the chargers, and we can talk through your charging layout.
Is a lithium-ion forklift cheaper than diesel or lead-acid?
Weigh the purchase price against running costs over the forklift's working life. On suitable sites, running costs can be lower: electricity instead of diesel, no engine oil, filters or exhaust system to service, and less battery handling than lead-acid. We compare options for your site rather than quote general figures.
Is a lithium-ion forklift the same as an electric forklift?
A lithium-ion forklift is one type of electric forklift. “Electric forklift” also covers forklifts with lead-acid batteries. A lithium-ion battery can be topped up at breaks and needs no watering, while a lead-acid battery is normally charged fully and needs regular watering.
Ask for a site comparison
The aim is simple: a forklift that is ready when you need it, with fewer battery chores, and a charging or fuelling setup that fits your floor.
Ask for a site comparison by WhatsApp on +65 8518 6231 or through the enquiry form on this page. Email: forklift@scantruck.com.sg.
Parts & Warehouse
9 Buroh Street, Singapore 627569
Main line +65 6305 6600