MAHLE’s reputation as a good brand for commercial vehicle parts is backed not just by its OEM heritage, but also by its continuous product range expansion and innovation. In 2017, MAHLE significantly expanded its heavy-duty Commercial Vehicle (CV) filter portfolio, adding five new filters — including a fuel filter element and additional air filter elements — to meet the evolving demands of the CV market. These additions covered important applications for European trucks and buses, such as Scania G-Series, P-Series and R-Series engines, demonstrating MAHLE’s commitment to broad vehicle coverage and real-world applicability. By increasing its filtration offering in this way, MAHLE showed it wasn’t simply resting on past successes — it was actively responding to market needs for better protection and longer engine life across commercial vehicles. This ongoing development is crucial for fleets that operate in diverse environments and require components that can withstand high loads and variable fuel quality. MAHLE’s filter range expansions didn’t stop there; later in 2017 the company introduced seven additional CV filtersincluding new oil filters, fuel filters, an air filter and a cabin filter — all of original equipment (OE) quality. That means they maintain manufacturer standards and ensure the integrity of warranties when used in maintenance and repair. Why MAHLE Is Universally Regarded as a Good Brand in Commercial Vehicles MAHLE’s reputation as a good brand is built over decades of supplying original equipment (OE) components to leading European truck manufacturers. Its parts are engineered to meet the strict demands of Euro V and Euro VI engines , making them suitable for modern fleets focused on performance, emissions compliance, and total cost of ownership. Key reasons MAHLE is considered a good brand include: OEM Supplier Status MAHLE supplies components to manufacturers such as Mercedes-Benz, Volvo, MAN, Scania, DAF, and Iveco, reinforcing its credibility at the highest industry level. German Engineering & European Standards MAHLE parts are designed with precision, durability, and efficiency in mind, meeting strict European quality and emission regulations. Consistent Product Innovation MAHLE continues to expand and update its product range to support evolving engine technologies, rather than relying on legacy products. Proven Reliability in Heavy-Duty Operations From long-haul transport to urban distribution, MAHLE parts are tested for demanding real-world conditions. What This Means for Your Fleet Improved Engine Health: Better filtration translates to fewer contaminants entering critical engine systems, prolonging engine life and lowering maintenance costs. Expanded Vehicle Coverage: With new part references, fleets operating a mix of European trucks can find MAHLE parts that fit more models with confidence. OEM-Level Performance: OE-quality filters help maintain compliance with performance and emissions standards, especially for Euro V and Euro VI engines. Supporting Euro VI Fleets and Future-Ready Operations As fleet operators increasingly focus on Euro VI compliance, sustainability, and operational efficiency , the combination of MAHLE’s advanced engineering and Scantruck Singapore’s distribution capabilities becomes even more relevant. MAHLE components—especially filtration and engine parts—help: Reduce emissions Optimize combustion efficiency Protect critical engine systems Lower total cost of ownership over time Through Scantruck SG, these benefits are made accessible to regional fleets operating European trucks in Southeast Asia’s demanding conditions. Why Scantruck SG Is Your MAHLE Distributor for European CV Parts At Scantruck Engineering Pte Ltd , Scantruck Singapore stands as a trusted distributor of MAHLE parts in Singapore and the broader region , offering a wide selection of MAHLE CV parts from Europe . Whether you’re servicing fleets from Scania, Volvo, Mercedes-Benz, MAN, DAF, or Iveco, Scantruck SG provides quality OEM and aftermarket spare parts with efficient delivery and support. Scantruck What You Get from Scantruck SG: ✔ Genuine and OE-quality MAHLE parts for engines, filters, and other CV applications ✔ Ready stock and fast turnaround to reduce truck downtime ✔ Technical support and parts expertise from a dedicated commercial vehicle parts specialist ✔ Competitive pricing and warranty-backed products to protect your investment Whether you’re a fleet manager, workshop owner, or logistics operator , partnering with Scantruck Singapore means you can source reliable MAHLE commercial vehicle parts with confidence — backed by decades of experience in European CV parts distribution.

We are proud to participate in the region’s leading automotive aftermarket trade show , taking place at Dubai World Trade Centre (DWTC) . At this international platform, we showcase our European commercial vehicle parts and workshop solutions , designed to meet OEM standards and support high-performance fleet and workshop operations. Real Connections, Real Conversations Beyond product displays, this exhibition is about meaningful face-to-face discussions . From technical consultations to partnership explorations, our team is actively engaging with industry professionals, distributors, and fleet operators to understand market needs and share practical solutions. These conversations allow us to: Exchange insights on European commercial vehicle parts Discuss OEM standards and quality expectations Explore long-term collaboration opportunities across regions What We’re Showcasing at the Event At our booth, visitors can explore: OEM and European commercial vehicle spare parts Solutions for trucks and heavy-duty vehicles Workshop technologies designed to improve efficiency and reduce vehicle downtime Digital access to spare parts sourcing for faster decision-making Our focus is simple: helping workshops and fleets operate more efficiently with reliable, high-quality parts. Event Details 📍 Location: Hall 3, Booth F10 – Singapore Pavilion 📅 Date: 9–11 December 2025 📌 Venue: Dubai World Trade Centre (DWTC), UAE Let’s Connect in Dubai If you’re attending the exhibition, we’d love to meet you in person. Stop by Hall 3, Booth F10 to discuss partnership opportunities, product availability, and how our solutions can support your commercial vehicle operations. Let’s connect, collaborate, and grow together in Dubai.

Axle & Differential Overhaul for European Heavy Vehicles The gearbox can only do its job if the drive axles and differentials are healthy. For heavy European applications – city buses, tippers, mixers, prime movers and mining support trucks – operators in Singapore commonly use hub-reduction or heavy single-reduction axles from Scania, Volvo, MAN and others Scantruck provides complete overhaul services for: Tandem drive axles on 6×4 and 8×4 trucks Rear axles on buses and coaches Hub-reduction axles in construction and mining support vehicles Scania R660 / RB662 Hub-Reduction Axles A common configuration in modern Scania trucks is the RB662 + R660 tandem gear, a tandem-driven single-reduction or hub-reduction assembly rated for gross vehicle and train weights up to 80 tonnes, with gear ratios from 2.92 to 4.88 depending on spec. Key characteristics: High-capacity differential unit (R660) with selectable diff-lock, designed for long-haul and construction duties.  Optional hub reduction on some variants to lower torque in the axle shafts while increasing ground clearance and durability in heavy-haul applications. Typical failure points: Pitting or spalling on crown wheel and pinion from contamination or incorrect preload. Worn differential locks and dog clutches causing incomplete engagement and sudden failures under load. Bearing failures in hub-reduction planetary sets due to lubricant degradation or overloading. Scantruck’s overhaul programme includes: Full strip-down of the differential carrier (e.g. R660) and hub units. Gear tooth contact pattern checks, backlash and preload set-up to factory specifications. Replacement of bearings, seals and locking devices using OE-equivalent parts. Inspection of axle housings for fatigue or misalignment, which can otherwise destroy a freshly overhauled diff. Volvo, MAN and Other European Axles While model codes vary (e.g. different Volvo hub-reduction and MAN tandem axles), the technical themes are similar: Single reduction vs hub reduction – balancing efficiency for highway work versus durability and ground clearance for construction/mining. Planetary hub sets – correct bearing preloads and gear backlash are critical; cheap partial repairs often ignore internal wear. Diff-lock and cross-lock systems – actuators and dog clutches must engage cleanly; rounded teeth and poor air supply cause failures. Scantruck’s axle work typically accompanies engine and gearbox overhauls so that the entire driveline (engine–clutch–gearbox–prop-shaft–axles) is brought back to a known condition. Why Overhaul Axles With an Engine/Gearbox Job? For a European CV operator, there are strong technical reasons to synchronise these jobs: Matched ratios – when swapping differentials or final drive ratios (e.g. moving from a 4.88 to 3.27 R660), gearbox and engine calibration must be checked to maintain performance and fuel consumption.  Shared contamination – when a differential or hub fails, metallic debris frequently travels through the oil into the brakes and bearings; similarly, failing U-joints can shock-load both gearbox and axle. Downtime optimisation – most operators prefer a single planned downtime window where engine, gearbox and axles are all inspected, overhauled where necessary, and returned with a unified warranty. How Scantruck Positions Itself in the Axle Overhaul Market European only, by design – We focus on Scania, Volvo, Mercedes-Benz, MAN and DAF driveline packages, which allows us to invest in the correct tools, data and parts for these families. Integration with our gearbox and engine work – We routinely see vehicles where a gearbox failure was caused by a dragging brake or a failing hub-reduction; treating the driveline as a system is what reduces repeat failures. Support for demanding sectors – Public bus fleets, construction and mining support trucks, and logistics operators who need predictable uptime and clear documentation. If you’re planning a major engine or gearbox overhaul on a European truck or bus in Singapore, talk to Scantruck about including a differential and axle inspection at the same time. It’s often the most cost-effective way to secure the entire driveline. Contact us now to book an appointment!

When it comes to air brake systems and vehicle control technologies, WABCO is a global leader. With decades of innovation in pneumatic and electronic braking systems, WABCO ensures reliability, safety, and performance for commercial vehicles worldwide. As the official distributor of WABCO spare parts in Singapore, Scantruck Engineering Pte Ltd supplies workshops, resellers, and fleet operators with authentic OEM components. These parts keep fleets safe, compliant, and on the road longer. Top 10 Fast-Moving WABCO Parts of 2025 Below are the top 10 fast-moving WABCO parts for 2025. They were selected for their consistent demand, reliability, and essential role in modern fleet operations. 1. WABCO 9325100090 – Air Processing Unit (E-APU) The Air Processing Unit (E-APU) is a compact, all-in-one air management module. It regulates pressure, dries air, and safeguards braking performance. Key Benefits: Ensures clean, dry air for braking systems. Reduces corrosion and ice formation. Minimises downtime with a modular design. OEM-tested for European trucks. Available at Scantruck Singapore – your trusted OEM parts partner. 2. WABCO 4801041070 – EBS Axle Modulator 2-Channel - Gen2 This two-channel EBS modulator optimises brake force electronically for improved safety and stopping stability. Key Benefits: Ensures balanced braking response. Fast signal and valve operation. Reliable under high-temperature conditions. OEM-grade performance. 3. WABCO 4213500870 – 3 Position Cylinder The 3 Position Cylinder is a heavy-duty pneumatic actuator. It provides smooth and reliable multi-position air control. Key Benefits: Maintains stable air pressure balance. Prevents system overload. Corrosion-resistant housing. Built to OEM standards. 4. WABCO 4461352050 – ECU EBS3.4 DAF The ECU EBS 3.4 coordinates brake system inputs for precise modulation and optimal vehicle stability. Key Benefits: Fast data processing and response. Enhanced safety and traction control. Reduced brake wear. OEM-verified electronic design. 5. WABCO 9125120310 – Twin-Cyl.Compressor 636cc,flangemounted This high-output twin compressor supplies consistent air pressure for braking and auxiliary systems. Key Benefits: High airflow capacity. Robust, low-vibration design. Extended service intervals. OEM-certified reliability. 6. WABCO 4324251050 – Electrically Controlled Air Dryer This dryer automatically removes moisture and contaminants with electrical control for improved drying efficiency. Key Benefits: Prevents corrosion and contamination. Compact and efficient design. Easy maintenance and cartridge replacement. OEM-approved filtration media. 7. WABCO 4111510040 – Single-Cylinder compressor, flange mounted This compressor is designed for smaller or auxiliary pneumatic systems. It provides efficient air compression in a compact form. Key Benefits: Smooth and stable operation. Durable under continuous use. Easy to service. OEM-grade component quality. Contact Scantruck Singapore for genuine replacements. 8. WABCO 4801040020 – EBS Axle Modulator 2-Channel - Gen2 This modulator provides precise braking modulation for two-axle configurations. It ensures balanced and safe deceleration. Key Benefits: Accurate pressure regulation. Optimised braking in all conditions. Fast response and fault detection. OEM-tested and fleet-proven. 9. WABCO 4800200280 – Central Brake Unit This unit combines key brake system functions in one centralised unit. It improves efficiency and simplifies maintenance. Key Benefits: Maintains brake function under fault conditions. Compact and service-friendly design. High system protection. OEM-compliant for heavy-duty fleets. 10. WABCO 4801050070 – EBS Axle Modulator 2-Channel - Gen3 The Gen3 EBS modulator delivers improved communication speed, reliability, and precision for modern trucks. Key Benefits: Advanced electronic responsiveness. Enhanced braking stability. Streamlined installation. Why Choose WABCO – and Scantruck Singapore WABCO represents engineering innovation, precision, and trust in commercial braking and air control systems. Every component is tested to OEM standards. This ensures long-term reliability and safety for fleets worldwide. With Scantruck Engineering Pte Ltd as your official WABCO distributor, you benefit from: Access to genuine OEM brake and air system components. Expert technical guidance. Strong local stock and fast delivery. Confidence in every replacement. 📩 Contact us today at marketing@scantruck.com.sg Keep your fleet safe and efficient — with WABCO OEM parts from Scantruck Singapore.

Transmission Overhaul for European Commercial Vehicles in Singapore On modern European buses and trucks, the gearbox is no longer a simple manual unit: it’s an integrated system of mechatronics, retarder, PTOs and software. Improper repair can destroy clutches, cook oil and wipe out the rest of the driveline. Scantruck specialises in automatic, AMT and manual gearbox overhauls for: City buses and articulated buses Prime movers and rigid trucks Waste, municipal and distribution vehicles Our current transmission portfolio covers Allison, ZF and Scania Opticruise units used widely in Singapore’s European CV fleets. Allison AL306 – 6-Speed Automatic for Distribution & Municipal Trucks The Allison AL306 is part of the Allison 3000 Series™, a 6-speed fully automatic transmission rated for GCW up to 36 tonnes and engine torque up to around 1,695 Nm, depending on variant.   Key tech points: Hydraulic torque converter with lock-up clutch Planetary gearsets giving 6 forward ratios (typical range ~3.49:1 in 1st to ~0.65:1 in top) Integral retarder option for downhill braking Electronic control module with adaptive shift strategies Typical failure modes we see in Singapore: Overheated ATF from stop-start, high-temperature duties (waste, distribution) Worn converter lock-up clutch causing shudder and slip faults Valve body contamination leading to harsh or missing shifts Scantruck’s AL306 overhaul programme includes: Full teardown, replacement of wear elements (clutches, steels, seals, bushings) Reconditioning or replacement of torque converter Cleaning and flow-testing valve bodies Refill with approved Allison-spec fluids and resetting of TCM adaptions ZF Ecomid 9S1110 – 9-Speed Manual Transmission Many Volvo FE/FL and other mid-range European trucks in this region run the ZF Ecomid 9S1110 family – a 9-speed synchromesh gearbox for vehicles up to 36 tonnes GVW.   Key specifications: 9 forward speeds + 1 reverse Maximum input torque roughly 1100 Nm Initial oil fill around 8.8 litres and dry weight in the ~190 kg range What this means in practice: Correct synchroniser pack setup and clutch adjustment are critical for smooth shifting. Abuse (skip-shifting, poor clutch use) rapidly accelerates wear of blocker rings and dog teeth. Incomplete repairs often ignore internal detent and interlock components, leading to “mystery” jumping-out-of-gear complaints. Our ZF 9S1110 overhaul routine covers: Full measurement of shafts for run-out and spline wear Replacement of synchro assemblies with OE or high-quality aftermarket kits Bearing and seal replacement, correct preload setting Oil selection according to ZF specification and the vehicle’s duty profile ZF AS-Tronic 12AS2130 – 12-Speed Automated Manual The ZF AS-Tronic 12AS 2130 is a 12-speed automated manual transmission (AMT) widely fitted to DAF, MAN and other heavy European trucks, with torque ratings in the ~2100 Nm class.   The complexity comes from: Electro-pneumatic shifting system Automated clutch actuator and position sensors Integration with the engine ECU, retarder and cruise control Scantruck’s overhaul and commissioning process includes: Mechanical rebuild – bearings, synchros, seals and any damaged gearing. Actuator & clutch system service – inspection/replacement of clutch actuator, position sensors and gear-select actuators. Software calibration & learn-in – clutch biting point, gear selection maps and any OEM-specific procedures. Scania Opticruise Gearboxes – GR875R, GRS905R, GRSO925R In the Scania world, many buses and trucks in Singapore run Opticruise AMT gearboxes such as: GR875R – 8-speed Opticruise with retarder, widely used in K-series buses (e.g. K360). GRS905R / GRSO905R – 12-speed AMT with and without overdrive, common behind 12–13 L engines in P/G/R series trucks. GRSO925R – overdrive variant used in long-haul applications with integrated retarder. Technical points that matter: These are split-range constant-mesh gearboxes, not simple manuals. Opticruise relies on accurate input shaft speed, engine torque data and clutch control to execute smooth shifts. Internal retarder units demand correct cooling and oil flow. Scantruck’s approach: We treat the Opticruise gearbox as an integrated driveline system – engine ECU, gearbox ECU, clutch control and retarder. When overhauling a GR875R / GRS905R / GRSO925R, we also check: Clutch condition and flywheel run-out Gear selection cylinders and valve blocks Retarder performance and cooling circuit If you run a European bus or truck fleet in Singapore and are seeing harsh shifts, slipping clutches, gearbox fault codes or overheating oil, Scantruck can support you from diagnosis to full rebuild and recommissioning. Contact us now to book an appointment!

Engine Overhaul for European CV, Generator & Marine Applications in Singapore For operators running European commercial vehicles, generator sets and marine auxiliary engines, the engine is the foundation of reliability. When a Scania DC9, Mercedes-Benz OM906, or Caterpillar C9 is down, the entire operation stops. Scantruck Engineering specialises in complete major overhauls of European diesel engines, including: City buses (diesel & Euro-rated platforms) Distribution and long-haul trucks Industrial and standby generator sets Marine auxiliary engines derived from truck platforms Below is an overview of key European engine families Scantruck already supports — including newly added Mercedes-Benz platforms. Scania DC9, DC12 & DC13 – Bus, Truck & Marine-Derived Platforms Engine Families We Overhaul Scania DC9 18 310HP – 9-litre inline-5, ~310 hp / 228 kW, ~1550 Nm torque. Scania DC9 16 230HP Euro-4 – 230 hp, PDE injection, used in K-series city buses. Scania DC12 10 340HP – 11.7-litre inline-6 for heavy-duty buses and trucks. Scania DC13 114 L01 360HP Euro-5 – XPI common rail system with SCR emissions module. Technical characteristics important during overhaul: 4-valve heads — prone to guide and seat wear when overheated PDE or XPI injection — injector calibration critical High BMEP engines — liner protrusion, ring packs and main bearing clearances must be precise Integrated turbo/EGR/SCR systems — soot loading must be addressed early Because Scania industrial and marine engines share the same base blocks, heads and rotating assemblies, our overhaul knowledge applies directly to marine auxiliary engines built from DC9/DC13 platforms. Volvo D7F260 Euro-5 – FE / FL Platform A widely used European engine in Singapore fleets, the Volvo D7F260 is a 7.2-litre inline-6 producing ~260 hp and 1010 Nm, using SCR after-treatment. Technical considerations: Integrated cylinder head (SOHC, 4-valve/cyl) — vulnerable to overheating deformation Tight injector coding and VGT turbo parameters SCR system health impacts combustion pressure and soot load We inspect turbochargers, EGR interfaces, DEF dosing units and NOx sensors as part of the overhaul scope to ensure long-term reliability. MAN D0836 LFL5 – 6.9L Distribution Engine The MAN D0836 is a 6.9-litre inline-6 producing ~184–250 kW with torque levels up to 1000 Nm depending on variant. Key focus areas in overhaul: Common-rail injection system — requires precise calibration Valve seat wear in high-idle applications Cooling system condition — EGR coolers often become choke points This engine appears frequently in distribution trucks like the MAN TGM series. Mercedes-Benz OM906 – Heavy-Duty Inline-6 for Buses & Trucks The Mercedes-Benz OM906 LA is a 6.37-litre, inline-6 diesel engine used extensively in: Urban and intercity buses Medium-duty trucks (Axor/Actros derivatives) Industrial equipment Marine auxiliary packages (OM906-based gensets and propulsion auxiliaries) Technical Specifications (Specs vary by variant; representative OM906 LA figures:) Displacement: 6.37 L Bore x Stroke: ~102 mm × 130 mm Power Output: approx. 177–205 kW (240–280 hp) Torque: ~1100 Nm Injection System: Unit Pump System (UPS) or Common Rail Emissions: Euro III, IV and V variants depending on configuration These specifications align with typical OM906 LA application data. Common OM906 Overhaul Considerations Unit Pump Injection (UPS) Wear UPS elements are sensitive to fuel contamination and must be tested or replaced to avoid timing drift and misfires. Cylinder Head Fatigue OM906 heads are known for developing micro-cracks between valve seats if cooling efficiency drops. We perform pressure testing and crack detection (dye penetrant) before deciding on re-machining or replacement. Piston & Liner Cavitation Particularly in high-idle bus operations—improper coolant chemistry accelerates cavitation pitting in liners. Turbocharger & Charge-Air System Over-fueling from injector drift can cause elevated EGTs, damaging turbochargers, which is why we always test and calibrate after overhaul. Marine Adaptations Many marine auxiliary engines use OM906 blocks with: Heat exchanger cooling Marine-rated turbos Different governor settings Our experience with generator engines and CV platforms directly applies here. The OM906 is one of the most reliable mid-size European engines, but its performance depends on valvetrain health, calibration integrity and cooling efficiency — all part of Scantruck’s overhaul workflow. Industrial & Marine Engines – Caterpillar & Detroit Scantruck supports Caterpillar and Detroit engines used in generator sets, industrial machinery and marine contexts. Caterpillar 3406B 14.6-litre inline-6, widely used in generator and marine applications Ratings range from 290–480 hp Known for valvetrain and liner cavitation issues if coolant service is neglected Caterpillar C9 ACERT 8.8 L inline-6 205–280 kW range Common generator and vessel auxiliary engine Caterpillar C7.1 7.01 L inline-6 172–302 hp depending on arrangement Detroit Diesel Series 60 11.1–14 L variants 300–515 hp output classes Very common in both on-road heavy trucks and marine auxiliary applications Why Fleets Choose Scantruck for Engine Overhaul European CV Specialists We focus on Scania, Volvo, Mercedes-Benz, MAN and DAF — not every brand under the sun. Industrial & Marine Capability Because many gensets and vessel engines are derivatives of European truck engines, our CV expertise transfers directly. Data-Driven Engine Blueprinting We measure, document and calibrate every component according to OEM tolerances — liner protrusions, torque specs, bearing clearances, injector calibrations, turbo maps. Integrated Driveline Approach Engine overhaul is coordinated with gearbox and axle condition, since driveline failures are often interlinked. If your fleet or vessel operates engines such as Scania DC-series, Volvo D-series, MAN D0836, Mercedes OM906, Caterpillar industrial engines or Detroit Series 60, Scantruck offers: Failure analysis Overhaul estimation Parts supply Complete engine remanufacturing Recommissioning & diagnostics Contact Scantruck Engineering now for an inspection or consult our engineering team for a tailored overhaul plan!

M ining and construction are the backbone of Singapore’s infrastructure and economic progress. From large-scale urban projects to critical public works, these sectors depend on heavy machinery and trucks to deliver results on time. But machines are only as reliable as the parts that keep them running. That’s why access to heavy machinery parts in Singapore is not just an advantage—it’s a necessity. Without dependable parts, downtime becomes inevitable. In construction or mining, downtime equals lost revenue, delayed schedules, and reputational risk. Scantruck Singapore steps in as a trusted partner, providing a reliable supply of mining, construction, and truck spare parts in Singapore needed to keep operations moving without disruption." without disruption. The Role of Parts in Mining & Construction Every job site relies on powerful machines: Excavators moving tons of soil Bulldozers clearing ground Wheel loaders shifting bulk materials Haulage trucks transporting vital cargo When one machine breaks down, the ripple effects are immediate—work stalls, deadlines slip, and costs rise. That’s why fast access to construction equipment parts in Singapore makes the difference between staying on schedule and falling behind. Challenges Faced by Mining & Construction Companies Operating in Singapore’s tough environments brings unique challenges: Harsh Conditions – Dust, debris, and constant impact accelerate wear. High Wear-and-Tear – Tracks, filters, hydraulics, and cutting edges demand frequent replacement. Supply Delays – Waiting weeks for international shipments can halt entire projects." Without a responsive mining equipment parts supplier, projects risk costly standstills. How Scantruck Provides Solutions Scantruck ensures businesses have access to ready-stock parts in Singapore to minimize downtime and maximize productivity: Heavy Machinery Parts Singapore – Durable parts for excavators, wheel loaders, and graders. Construction Equipment Parts Singapore – Cranes, compactors, and site machinery spare parts. Mining Equipment Parts Supplier – High-strength components built for extreme mining conditions. Truck Spare Parts Singapore – Reliable Scania, Volvo, and MAN parts to keep fleets moving. Why Scantruck Is the Trusted Partner in Singapore What makes Scantruck different? Extensive Inventory – Large stock of critical components, ready for immediate dispatch. Fast Local Supply – No long delays—parts delivered when you need them most. Proven Reliability – Genuine and high-quality aftermarket parts meeting or exceeding OEM standards. Industry Expertise – Decades of experience supporting Singapore’s toughest industries. Real Impact on the Ground A construction site avoiding costly downtime with same-day crane part replacement. A mining fleet sustaining productivity thanks to durable components built for heavy loads. A logistics operator keeping deliveries on schedule with reliable truck spare parts in Singapore. These results build long-term trust—proving why so many companies choose Scantruck as their go-to supplier. Keep Your Projects Moving with Scantruck In industries where downtime is not an option, Scantruck delivers more than just parts—we deliver continuity, reliability, and confidence. With a complete supply of heavy machinery parts, construction equipment parts, mining components, and truck spare parts in Singapore, we help your business power progress without interruption. 👉 Don’t let shortages stop your operations. Contact us today: 📩 marketing@scantruck.com.sg

When it comes to reliable power transmission and engine efficiency, DAYCO stands among the world’s most trusted brands. With decades of experience supplying OEM-quality components to global truck and equipment manufacturers, DAYCO ensures every part delivers precision performance and long service life. As the official distributor of DAYCO spare parts in Singapore , Scantruck Engineering Pte Ltd provides commercial fleet operators, workshops, and resellers with fast access to genuine DAYCO products. Below are ten of the most in-demand DAYCO parts of 2025 , chosen for their reliability, performance, and importance in daily fleet operations. 1. DAYCO APV1151 – Automatic Belt Tensioner Precision Tension for Optimal Belt Performance The APV1151 ensures proper belt tension in heavy-duty truck engines. It prevents slippage, noise, and premature wear. Designed to maintain consistent tension under high loads, it enhances the performance of auxiliary systems such as the alternator and air conditioning compressor. Key Benefits: Maintains constant belt tension for longer lifespan Reduces vibration and noise Prevents costly downtime from belt failures Engineered for OEM-level durability Available at Scantruck Singapore – your trusted OEM parts partner. 2. DAYCO APV1120 – Automatic Belt Tensioner Reliability for Heavy-Duty Drive Systems The APV1120 offers dependable tension control in commercial vehicle engines. Its precision-engineered design supports optimal belt alignment and improved engine efficiency even under demanding operating conditions. Key Benefits: Ensures stable belt performance Minimizes maintenance intervals Reduces component wear and energy loss Designed for high-load truck applications Contact Scantruck Singapore for genuine DAYCO tensioners. 3. DAYCO 10PK1342SHD – Heavy-Duty Poly V-Belt Superior Grip for Power Transmission This 10PK1342SHD belt delivers exceptional flexibility and grip. It transfers power efficiently between engine pulleys. Made from reinforced EPDM compounds, it withstands extreme temperatures and high torque loads. Key Benefits: High resistance to cracking and wear Smooth, quiet operation Ideal for modern Euro 5–6 truck engines Extended service life under heavy use Available at Scantruck Singapore – official DAYCO distributor. 4. DAYCO APV2817 – Automatic Tensioner Assembly Optimized for Engine Accessory Drive Systems The APV2817 keeps accessory belts properly tensioned. This reduces the risk of misalignment and failure. It’s a crucial component for consistent alternator and fan performance. Key Benefits: Improves engine efficiency and reliability Reduces downtime and maintenance costs OEM-quality construction Easy installation and replacement Ask our team about OEM DAYCO replacements today. 5. DAYCO APV2729 / DY89943 – Belt Tensioner Assembly Engineered for Long-Term Performance This dual-reference tensioner (APV2729/DY89943) is widely used in European heavy-duty trucks. Built for endurance, it maintains optimal tension to ensure smooth accessory belt operation. Key Benefits: Designed to OEM specifications Enhances belt life and system stability Minimizes operational noise Suitable for high-mileage fleets Available now at Scantruck Singapore. 6. DAYCO 8PK2130HD – Heavy-Duty Serpentine Belt Built for Strength and Endurance The 8PK2130HD provides consistent power delivery to multiple engine accessories. Manufactured using high-strength rubber compounds, it’s ideal for high-performance and commercial diesel engines. Key Benefits: Excellent load-bearing capacity Resists heat and oil degradation Reduces slippage under high torque Proven OEM-grade reliability Find it at Scantruck Singapore – your DAYCO parts specialist. 7. DAYCO APV3064 – Belt Tensioner Assembly Consistent Tension, Constant Performance The APV3064 ensures that belts run smoothly, even in fluctuating temperature and load conditions. Its heavy-duty spring mechanism guarantees stability and consistent belt tension. Key Benefits: Extends belt and pulley life Reduces downtime and noise Easy, precise fitment OEM-approved quality assurance Contact Scantruck Singapore for authentic DAYCO components. 8. DAYCO APV1121 – Automatic Tensioner Engine Efficiency You Can Depend On The APV1121 delivers controlled belt tension. This ensures critical systems such as power steering and alternator perform at peak efficiency. Key Benefits: Consistent, automatic tension control Minimizes belt slippage and misalignment High durability for long-haul operations Backed by DAYCO OEM standards Now available through Scantruck Singapore. 9. DAYCO 8PK1565EPDM – Poly V-Belt Reliable Drive Belt for Modern Engines The 8PK1565EPDM is designed with advanced EPDM rubber compounds. It offers enhanced flexibility and wear resistance. This belt maintains reliable performance across a wide temperature range. Key Benefits: Long-lasting EPDM construction Excellent flexibility for compact engine bays Reduced vibration and noise Ideal for European truck applications Order genuine DAYCO belts from Scantruck Singapore. 10. DAYCO APV2811 / DY89108 – Automatic Belt Tensioner Trusted OEM Solution for Modern Truck Engines A popular OEM replacement, the APV2811 (DY89108) offers robust performance and consistent belt pressure. It’s a proven solution for reducing downtime and extending engine accessory life. Key Benefits: Maintains steady belt performance Prevents misalignment and slippage Reduces mechanical wear Tested for OEM durability standards Available exclusively at Scantruck Singapore. Why Choose DAYCO – and Scantruck Singapore DAYCO’s reputation is built on engineering innovation, OEM partnerships, and unmatched reliability . From tensioners to drive belts, every component is designed to optimize engine performance and minimize operational costs. With Scantruck Engineering Pte Ltd as your local DAYCO distributor, you gain: Direct access to genuine OEM parts Expert technical support from our Singapore-based team Fast delivery and strong local inventory Confidence in every replacement you install Keep your fleet running efficiently and reliably — contact Scantruck Singapore for OEM DAYCO spare parts. Conclusion In conclusion, choosing the right parts for your heavy-duty fleet is crucial. DAYCO provides the reliability and performance you need. With Scantruck as your partner, you can ensure your operations run smoothly. We are committed to supporting your business needs with quality parts and expert service. Let’s work together to keep your fleet at its best.

Knorr-Bremse, a global leader in braking and air management systems, offers a range of cutting-edge products designed to enhance vehicle performance, reliability, and longevity. From EBS modulators to air dryers and compressors, Knorr-Bremse products are engineered to keep heavy-duty trucks, trailers, and buses running smoothly. In this guide, we’ll explore their top components and why they are a must-have for your fleet. 1. EBS Modulator – KNORR-K021204N50 The Heart of Modern Braking Systems The EBS (Electronic Braking System) Modulator is a key component in modern commercial vehicles. It optimizes brake force distribution, improving safety, stability, and efficiency. Why Choose This? ✔ Faster Braking Response – Reduces stopping distance for improved road safety. ✔ Enhanced Vehicle Control – Prevents wheel lock-up and skidding. ✔ Increased Brake Longevity – Minimizes wear and tear on brake components. 📌 Best for: Fleets needing advanced braking precision and reliability. 2. EAC Air Processing Unit – KNORR-K214840N50 & KNORR-K184253N50 K250194N50 Optimized Air Management for Braking Systems The EAC Air Processing Unit ensures clean and moisture-free air in pneumatic brake systems, preventing corrosion and improving efficiency. Key Benefits: ✔ Prevents Water Buildup – Eliminates moisture that could freeze and damage air lines. ✔ Reduces Maintenance Costs – Extends the life of air brake components. ✔ Ensures Consistent Air Supply – Keeps braking systems functioning optimally. 📌 Best for: Trucks and trailers operating in diverse weather conditions. 3. Air Dryer Assembly – KNORR-ZE4501 & KNORR-K00450260 Protect Your Air Braking System Air dryers play a crucial role in preventing moisture and contaminants from damaging the air braking system. Knorr-Bremse’s Air Dryer Assemblies are built for maximum efficiency. Why This Matters: ✔ Prevents System Failures – Removes harmful moisture and particles. ✔ Increases Air System Longevity – Reduces rust and wear. ✔ Enhances Overall Braking Performance – Ensures steady airflow for reliable braking. 📌 Best for: Commercial fleets requiring reliable air drying solutions. 4. Trailer Control Valve – KNORR-K020623N50 Seamless Air Brake Control for Trailers A Trailer Control Valve regulates brake pressure in trailers, ensuring synchronized and safe stopping. Why This is Essential: ✔ Prevents Trailer Skidding – Balances braking force for stability. ✔ Quick Pressure Adjustments – Ensures a smoother braking experience. ✔ Durable & Long-Lasting – Built to withstand harsh conditions. 📌 Best for: Heavy-duty trucks and trailers requiring precise brake control. 5. Pressure Control Valve – KNORR-K020024N50 Maintain Proper Brake Pressure The Pressure Control Valve ensures balanced and controlled braking, reducing wear and improving efficiency. Top Features: ✔ Optimized Brake Performance – Distributes pressure evenly. ✔ Protects Against Brake Wear – Reduces strain on brake pads. ✔ Reliable in Extreme Conditions – Engineered for long-term durability. 📌 Best for: Vehicles needing precise pressure management in braking systems. 6. Clutch Servo – KNORR-K013727N50 Smoother Clutch Engagement A Clutch Servo assists in the engagement and disengagement of the clutch, reducing manual effort and ensuring smoother shifting. Key Benefits: ✔ Reduces Driver Fatigue – Makes gear changes effortless. ✔ Prolongs Clutch Life – Minimizes wear on transmission components. ✔ Improves Fuel Efficiency – Reduces unnecessary clutch slippage. 📌 Best for: Fleets with manual transmission vehicles. 7. High-Performance Air Compressors Knorr-Bremse offers multiple air compressors tailored for different vehicle applications, including: KNORR-K016615KT-60 (LP4965 / LK4941 – Made in Brazil) KNORR-K172098N05BR-60 (LK4951 Big Cone – Made in Brazil) KNORR-K194709-60 (LK4951 Small Cone – Made in Brazil) Why You Need a Quality Air Compressor: ✔ Ensures Steady Airflow – Keeps brake and suspension systems functioning. ✔ Prevents Pressure Drops – Maintains optimal air pressure levels. ✔ OEM-Quality Durability – Designed to meet strict industry standards. 📌Best for: Vehicles requiring high-efficiency air compression for braking and air suspension. 8. Protection Valve – KNORR-II37464N50 Safeguarding Your Air Brake System A Protection Valve prevents air pressure loss, ensuring that other components function properly. Why This is Critical: ✔ Prevents System Leaks – Keeps air brake pressure stable .✔ Enhances Brake Safety – Ensures air distribution remains consistent. ✔ Long-Lasting & Durable – Built for heavy-duty applications. 📌 Best for: Trucks operating in high-pressure braking environments. Why Choose Knorr-Bremse? Knorr-Bremse has a global reputation for producing high-performance, OEM-quality parts that prioritize safety, efficiency, and durability. Their products are used in leading commercial fleets, ensuring: ✅ Reliable Performance ✅ Enhanced Vehicle Safety ✅ Extended Component Lifespan If you're looking for the best truck components, Knorr-Bremse is a name you can trust. Investing in high-quality EBS modulators, air dryers, compressors, and clutch servos ensures your fleet runs safely and efficiently. 🚛 Upgrade Your Fleet Today! Explore Knorr-Bremse’s top-tier components and give your vehicles the performance boost they deserve. 👉Looking for genuine Knorr-Bremse components for your truck or commercial fleet? 📍 Contact Scantruck is your trusted dealer for OEM-quality Knorr-Bremse products. Whether you need braking systems, air compressors, or filtration solutions, our experts can help you find the right parts.

Every engine has a lifespan — and for commercial vehicles that lifespan is earned through thousands of operating hours. If you manage a fleet, even small symptoms (reduced power, higher fuel use, strange noises) are worth attention: they can be early signs that an engine overhaul will save you time and money compared with repeated roadside repairs. At Scantruck Singapore Workshop we help fleet owners and operators diagnose symptoms early and choose the right repair path — from targeted repairs to a full engine overhaul — so you avoid costly downtime and extend vehicle life. What is an engine overhaul? An engine overhaul is a full internal restoration that returns the engine to reliable working condition. A typical overhaul includes: • Full disassembly and deep cleaning of components • Inspection of pistons, piston rings, bearings, valves, cylinder liners and seals • Replacement of worn or damaged components with OEM-quality parts (we stock and fit trusted European and aftermarket brands) • Reassembly, precision testing and calibration for performance and emissions compliance Think of it as a factory-level reset for your engine — restoring power, efficiency and reliability without the expense of a new engine. 5 Clear signs you should book a diagnostic (and consider an overhaul) Excessive or unusual exhaust smoke • White smoke — possible coolant leak into combustion chambers. • Blue smoke — oil being burned inside the engine. • Black smoke — fuel system or combustion issues. Any persistent change in smoke type or volume is a red flag — schedule a diagnostic straight away. Noticeable loss of power or sluggish acceleration Difficulty climbing inclines or slow pick-up can indicate worn pistons, rings or compression loss. Abnormally high oil or coolant consumption If you’re topping up fluids more than usual, internal leaks or seal degradation might be developing. Unusual mechanical noises (knocking, tapping, rattling) Metallic knocks or persistent tapping usually mean internal stress or bearing wear — ignore them at high risk. Frequent overheating Recurrent overheating damages internal components quickly and often necessitates a full overhaul to repair. Why a timely overhaul saves money Putting off major servicing can look cheaper in the short term but often results in: • Roadside breakdowns and lost delivery time • Increased fuel and oil costs • Shorter engine life and reduced resale value • Much larger repair bills later A planned overhaul helps maintain uptime, protects fleet schedules and reduces lifetime operating cost. What Scantruck Workshop offers We’re a Singapore-based commercial vehicle workshop focused on keeping your fleet moving. Our workshop capabilities include: • Full engine overhauls and rebuilds (OEM-quality parts) • Diagnostics and compression testing • Component renewal (pistons, rings, bearings, liners, valves) • DPF cleaning and regeneration (Oxyhtech systems supported) • Fuel system and AdBlue/DEF diagnostics and repair • Clutch and transmission service, brake work and scheduled maintenance • Emergency breakdown support (we operate a breakdown van for on-site assistance) Our team: experienced technicians, a purpose-equipped workshop and a parts supply chain that supports timely repairs for European commercial vehicles. Expert tip from Scantruck Regular oil changes and preventive inspections are the most effective ways to extend your engine’s lifespan. But beyond routine service, here’s what our workshop team recommends to keep your truck running efficiently and avoid costly overhauls: • Monitor your engine health regularly. Schedule a full diagnostic every 250,000– 300,000 km or sooner if you notice power loss, smoke, or overheating. • Use the right oil and filters. Follow the manufacturer’s specifications — using the wrong oil grade can accelerate wear and reduce compression. • Keep your cooling system clean. Old coolant or clogged radiators are a common cause of overheating and internal corrosion. • Avoid excessive idling. Long idle times increase carbon buildup and fuel dilution, which shorten engine life.• Don’t ignore small changes. Unusual noises, leaks, or changes in exhaust colour are early warnings — diagnosing them early prevents major failures. By following these habits, you can reduce unplanned downtime, lower maintenance costs, and get more productive mileage out of every engine in your fleet. Ready to Check Your Engine? If you notice any of the symptoms above, don’t wait until a small issue becomes a major failure. Let the Scantruck Workshop team inspect your engine and help you plan the right repair or overhaul. 📍 Visit us at: Scantruck Singapore Workshop 16 Gul Drive, Singapore 629467 📞 Call or WhatsApp: +65 8053 6319 🔗 Book your visit: scantruck.com.sg or simply reach out via our Contact Form to set up an appointment.